Dehumidifiers

FH-GH 20 l/24h

FH-GH

Description

The dehumidifiers FH and GH series are high performance units, equipped with robust galvanised steel frame, properly designed to operate in combination with radiant cooling systems.

The FH units have been designed for wall mounting installation while the GH series are suitable for false ceiling and ducted applications. All units are provided with air filter, stainless steel drip tray and built-in microprocessor control. The units are also provided, standard, with pre and post cooling coil to enhance the performances and to control the air supply temperature.

FH and GH units, anyway, can operate even without pre and post cooling coils, this option could be very useful in middle seasons when it is necessary to dry but the air conditioning system is not in operation. All the units are fully assembled and wired in the factory, carefully evacuated and dried with after leak tests under pressure and they are charged with environmental friendly refrigerant gases.

They are fully tested before shipment; the units are conform to European Directives and are individually marked with CE label and Conformity Declaration.

Versions

  • WZ Units supplied with double condenser

Refrigerants

  • R134a

Dehumidifiers

GHE 30 - 60 l/24h

GHE

Description

The dehumidifiers with heat recovery of high efficiency series GHE were designed to provide dehumidification and fresh air in a residential area with very high energy efficiency, combined with radiant cooling systems.

The units have been designed to grant the dehumidification either under conditions of thermally neutral air or in terms of air-cooled, managing small air flow thus avoiding annoying tiny air currents typical of traditional air conditioning systems.

The units consist of a direct expansion cooling system combined with a cross flow heat exchanger highly efficient, designed for heat recovery and air exchange environment in compliance with applicable regional and national lows.

Versions

  • FC Free cooling

Refrigerants

  • R134a
  • R410A

Dehumidifiers

FHE 30 l/24h

FHE

Description

The dehumidifiers with heat recovery of high efficiency series FHE were designed to provide dehumidification and fresh air in a residential area with very high energy efficiency, combined with radiant cooling systems.

The units have been designed to grant the dehumidification either under conditions of thermally neutral air or in terms of air-cooled, managing small air flow thus avoiding annoying tiny air currents typical of traditional air conditioning systems.

The units consist of a direct expansion cooling system combined with a cross flow heat exchanger highly efficient, designed for heat recovery and air exchange environment in compliance with applicable regional and national lows.

Refrigerants

  • R134a

Dehumidifiers

HBA 50 - 200 l/24h

HBA

Description

HBA dehumidifiers series are high-performances units especially designed for industrial or commercial purposes where humidity level should be controlled or water vapor condensation should be prevented.

These units are particularly indicated for archives, ironing rooms, bookstores, cheese factories, underground rooms, cellars and industrial sites where high humidity level is present. This series comprises 5 models which cover a capacity range from 50 to 200 l/24h. HBA units are designed for easy maintenance and service, each part being readily accessible and, when required, easily replaceable thus reducing service and maintenance costs.

HBA units are designed for easy maintenance and service, each part being readily accessible and, when required, easily replaceable thus reducing service and maintenance costs.
The units are supplied with a solenoid valves set for the hot ga s injection used to defrost the evaporator in case of severe working conditions.

Temperature and humidity probes are accessories supplied on request.

Versions

  • A Version with cabinet
  • P Ductable units

Refrigerants

  • R410A

Dehumidifiers

HHA 50 - 550 l/24h

HHA

Description

HHA dehumidifiers series are high-performances units especially designed for industrial or commercial purposes where humidity level should be controlled or water vapor condensation should be prevented.

These units are particularly indicated for archives, ironing rooms, bookstores, cheese factories, underground rooms, cellars and industrial sites where high humidity level is present. This series comprises 8 models which cover a capacity range from 50 to 550 l/24h. These units are intended to be ceiling installed in a technical room. A centrifugal fan with high available static pressure allows unit connection to ductworks, both for air suction and discharge.

The units are supplied with a solenoid valves set for the hot ga s injection used to defrost the evaporator in case of severe working conditions.

Temperature and humidity probes are accessories supplied on request.

Refrigerants

  • R410A

Dehumidifiers

HDA 73 - 200 l/24h

HDA

Description

HDA dehumidifiers series are high-performances units espe-cially designed for industrial or commercial purposes where humidity level should be controlled or water vapor condensa-tion should be prevented. These units are particularly indicat-ed for archives, ironing rooms, bookstores, cheese factories, underground rooms, cellars and industrial sites where high humidity level is present.

This series comprises 4 models which cover a capacity range from 73 to 200 l/24h. HDA units are designed for easy maintenance and service, each part being readily accessible and, when required, easily replaceable thus reducing service and maintenance costs.

The units are supplied with a solenoid valves set for the hot ga s injection used to defrost the evaporator in case of severe working conditions.

Temperature and humidity probes are accessories supplied on request.

Refrigerants

  • R410A

Dehumidifiers

NHA - NHAZ 260 - 940 l/24h

NHA – NHAZ

Description

Dehumidifiers are high-performances units especially designed for industrial or commercial purposes where humidity level should be controlled or water vapor condensation should be prevented.

These units are particularly indicated for archives, ironing rooms, bookstores, cheese factories, underground rooms, cellars and industrial sites where high humidity level is present. This series comprises 6 models which cover a capacity range from 263 to 940 l/24h. The units are designed for easy maintenance and service, each part being readily accessible and, when required, easily replaceable thus reducing service and maintenance costs.

The NHA units are supplied with a solenoid valves set for the hot gas injection used to defrost the evaporator in case of severe working conditions.

Temperature and humidity probes are accessories supplied on request.

Versions

  • Z Version with temperature control

Refrigerants

  • R410A

Dehumidifiers

HMA 260 - 940 l/24h

HMA

Description

HMA dehumidifiers series are high-performances units espe-cially designed for industrial or commercial purposes where humidity level should be controlled or water vapor condensa-tion should be prevented. These units are particularly indicat-ed for archives, ironing rooms, bookstores, cheese factories, underground rooms, cellars and industrial sites where high humidity level is present.

This series comprises 6 models which cover a capacity range from 263 to 940 l/24h. HMA units are designed for easy maintenance and service, in fact, the internal parts are mainly located in a soundproofed technical compartment, easily accessible even if the unit is running.

The units are supplied with a solenoid valves set for the hot ga s injection used to defrost the evaporator in case of severe working conditions.
The units are equipped with an advanced microprocessor with preparation for RS485 connection (optional).

Temperature and humidity probes are accessories supplied on request.

Refrigerants

  • R410A

Dehumidifiers

HMA Z 260 - 940 l/24h

HMA Z

Description

Dehumidifiers are high-performances units especially designed for industrial or commercial purposes where it is necessary the simultaneous control of temperature and humidity or water vapor condensation should be prevented. These units are particularly indicated for archives, ironing rooms, bookstores, cheese factories, underground rooms, cellars and industrial sites where high humidity level is present.

This series comprises 6 models which cover a capacity range from 263 to 940 l/24h. The units are designed for easy maintenance and service, , in fact, the internal parts are mainly located in a soundproofed technical compartment, easily accessible even if the unit is running.

The units are supplied with a solenoid valves set for the hot ga s injection used to defrost the evaporator in case of severe working conditions.

Dehumidification mode: the internal condenser is activated; the unit dehumidifies and heats up the room temperature; Cooling mode: the remote condenser is activated; the unit dehumidifies and cools down the room temperature.
The units are equipped with an advanced microprocessor with preparation for RS485 connection (optional).

Temperature and humidity probes are accessories supplied on request.

Versions

  • Z Version with temperature control

Refrigerants

  • R410A

Dehumidifiers

HMA BT 260 - 940 l/24h

HMA BT

Description

HMA/BT cold room industrial dehumidifiers series are high-performances units especially designed for industrial or commercial purposes where humidity level should be controlled or water vapour condensation should be prevented. These units are particularly indicated for cold rooms, cellars and industrial sites where humidity has to be controlled at low temperature conditions.

This series comprises 6 models which cover a capacity range from 263 to 940 l/24h. Units are designed for easy maintenance and service, in fact, the internal parts are mainly located in a soundproofed technical compartment, easily accessible even if the unit is running.

The units are supplied with a specific refrigerant circuit design to operate with a wide range of temperatures, they are also equipped with hot gas injection system (used to defrost the evaporator) and condensate discharge drip tray equipped with antifreeze heater, in case of operation in low ambient temperature conditions.

The units are equipped with an advanced microprocessor with preparation for RS485 connection (optional).

Temperature and humidity probes are accessories supplied on request.

Refrigerants

  • R410A

Dehumidifiers

SBA 50 - 200 l/24h

SBA

Description

Series SBA dehumidifier are expressly designed for use in swimming pools where humidity should be closely controlled in order to guarantee optimal comfort.
This series comprises five models which cover a capacity range from 50 to 200 l/24h.

SBA units are designed for easy maintenance and service, each part being readily accessible and, when required, easily replaceable thus reducing service and maintenance costs.

Temperature and humidity probes are accessories supplied on request.

Versions

  • A Version with cabinet
  • P Ductable units

Refrigerants

  • R410A

Dehumidifiers

SHA 50 - 200 l/24h

SHA

Description

Series SHA dehumidifier are expressly designed for use in swimming pools where humidity should be closely controlled in order to guarantee optimal comfort. These units are intended to be installed in a technical room close to the swimming pool.

A centrifugal fan with high available static pressure allows unit connection to ductworks, both for air suction and discharge.
This series comprises 5 basic models which cover a capacity range from 50 to 190 l/24h.

Temperature and humidity probes are accessories supplied on request.

Refrigerants

  • R410A

Dehumidifiers

SDA 73 - 200 l/24h

SDA

Description

Series SDA dehumidifier are expressly designed for use in swimming pools where humidity should be closely controlled in order to guarantee optimal comfort. These units are intended to be installed in a technical room close to the swimming pool.

A centrifugal fan with high available static pressure allows unit connection to ductworks, both for air suction and discharge. This series comprises 6 basic models which cover a capacity range from 73 to 240 l/24h.

Temperature and humidity probes are accessories supplied on request.

Refrigerants

  • R410A

Dehumidifiers

NSA 260 - 940 l/24h

NSA

Description

Series NSA dehumidifier are expressly designed for use in swimming pools where humidity should be closely controlled in order to guarantee optimal comfort. These units are intended to be installed in a technical room close to the swimming pool.
A centrifugal fan with high available static pressure allows unit connection to ductworks, both for air suction and discharge.

This series comprises 6 basic models which cover a capacity range from 263 to 940 l/24h.

Temperature and humidity probes are accessories supplied on request.

Refrigerants

  • R410A

Dehumidifiers

SMA 260 - 940 l/24h

SMA

Description

Series SMA dehumidifier are expressly designed for use in swimming pools where humidity should be closely controlled in order to guarantee optimal comfort.
These units are intended to be installed in a technical room close to the swimming pool.
A centrifugal fan with high available static pressure allows unit connection to ductworks, both for air suction and discharge. This series comprises 6 basic models which cover a capacity range from 263 to 940 l/24h.

Temperature and humidity probes are accessories supplied on request.

Refrigerants

  • R410A

Dehumidifiers

SRH 1150 - 3000 l/24h

SRH

Description

Series SRH dehumidifier are expressly designed for use in swimming pools where humidity should be closely controlled in order to guarantee optimal comfort.
These units are intended to be installed in a technical room close to the swimming pool. A centrifugal fan with high available static pressure allows unit connection to ductworks, both for air suction and discharge.

This series comprises 6 basic models which cover a capacity range from 1150 to 3000 l/24h. All the units are fully assembled and wired at the factory.

Versions

  • WZ Unit with heat recovery

Refrigerants

  • R407C

Dehumidifiers

UTA - UTAZ 132 - 910 l/24h

UTA – UTAZ

Description

The energy recovery high efficiency dehumidifiers UTA range have been designed to grant the complete control of temperature, humidity, the energy recovery and the fresh air treatment in the covered swimming pools or in other applications with very high internal loads. The UTA units can operate in environments up to 36°C and are able to manage up to 30% of fresh air.

The range includes 7 models, which covers airflows range from 1500 to 6000 m3/h.

The use of double-passage-cross-flow energy recovery allows to increase up to 30% the dehumidification capacity in comparison to the traditional dehumidifiers.

The use of the double passage in the energy recovery, in fact, allows the free sensible pre-cooling of the air near to the saturation point, giving so the possibility to the unit to work, basically, in latent load.

Versions

  • Z Version with temperature control

Refrigerants

  • R410A